Beer Pump Systems

Air Driven Beer Pump Dispensing Systems – Reduce CO2 consumption

dual beer pump system
By upgrading to a Bracton beer pump system you can significantly reduce your venues consumption of mixed CO2 and nitrogen gases for dispense of draught beer. The use of a compressed air powered beer pump system reduces system pressure, minimising carbonation risks. Air compressor powered beer pumps are environmentally friendly, significantly reducing carbon footprint and gas usage. The cost of a Bracton beer pump system normally repays its’ initial cost within 2 years, figures based on an average hotels gas consumption.


Benefits of installing a Bracton Beer Pump System

  • Up to 66% gas usage savings
  • Presentation – beer not effected by under or over carbonation
  • Beer Flavour – not affected by nitrogen
  • Less beer wastage
  • Less regulators to be used
  • Low CO2 gas pressure for equilibrium only
  • Reduce the number of spare cylinders rented each month

Typical flojet beer pump system

Specifications – Oil-less Beverage Compressor

beverage-oil-less-air-compressor

The new economical Bracton Oil-less Beverage Compressor.
  • Motor: 750W 1HP
  • Amps:  3.2A
  • Displacement: 155LPM  5.5CFM
  • Pressure: 8 Bar   116psi
  • Tank: 25L
  • Weight: 28kg
  • Dimensions: 41cm x 41cm x 58cm

The Oil-less Beverage Compressor.
The new economical Bracton Oil-less Beverage Compressor.
Motor: 750W 1HPAmps:  3.2ADisplacement: 155LPM  5.5CFMPressure: 8 Bar   116psiTank: 25LWeight: 28kgDimensions: 41cm x 41cm x 58cm

Capabilities & Specifications – Flojet G56G56 Flojet Beer Pump

  • Cost Effective – No need for mixed gases or gas blenders.
  • Increases the pressure in the product dispense line, which ensures the inherent gas in the beer cannot break out.
  • Smaller ID tube can be used which reduces wasted beer when cleaning lines.
  • Capable of traversing up to 244m horizontally through a single line.
  • Capable of delivering beer up to 10 stories (30m) vertically through a single line.
  • Pump can be used to aid line cleaning through wall mounted cleaning sockets.
  • Can dispense to up to 5 beer taps from a single keg or keg series.
  • Feeds up to 3 beer taps through a single line

Pump Design Positive Displacement, Double Diaphragm
Power Source CO2 Gas, Nitrogen or Compressed Filtered Air
Construction Polypropylene, Santoprene®, EPDM, AISI 304 Stainless Steel
Temperature 1.1 – 49 °C
Displacement 91mL per cycle
Self Priming 3.05 m
Operating Pressure 10 – 90 psi
Max Inlet Pressure 30 psi
Flow Rate 18.9 lpm
Weight 0.56 kg
Dimensions 13.38 x 8.15 x 11.63 cms