Cleaning Equipment

Bracton Beer Line Cleaning Equipment ensures your venue has the best tasting beer in town with minimal effort.

beerline-cleaning-systems
BEER LINE CLEANING SYSTEM – ON DEMAND MIXING

The Bracton Beer Line Cleaning System is the industry standard in safety and efficiency in beer line cleaning. When connected to water supply, the dispenser operates without electricity, using water pressure as the power source.

As water flows through, it activates the dispenser drawing the correct mixture of DP1 and DP2 cleaning solution accurate to 0.1% into the beer lines and towards the beer taps.

The system increases efficiency by mixing the correct amount of cleaning solution and reducing labour requirements. This enhances safety precautions by eliminating a staff contact point with chemicals and pressurised vessels.

  • Zero wastage, machine only mixes what venue needs.
  • No direct contact with hazardous chemicals.
  • No pressurised hazardous chemicals.
  • Save on labour – no setup time.
  • Meets Safe Work Australia’s hierarchy of control guidelines.

WA4030   Beerline Cleaning / 2 Pumps/BARE/suit DP1/DP2
WA4050   Beerline Cleaning / 1 Pump/BARE/suit TWIN
WA4060BL   Installation kit / B-lock
WA4060PV   Installation kit / Pin Valve
WAD3RE2   D3RE2 Dosatron 0.2-3% dosing pump bare

stainless-washout-keg
BEER LINE CLEANING VESSEL - STAINLESS STEEL

Suitable for small venues, Stainless Steel Washout Kegs can be used to manually mix beerline cleaning chemicals into beer systems. Complete with safety valve the washout keg is available with quick release pin or B-Lock fittings. Bracton recommends using non-hazardous beerline cleaner in pressure vessels to reduce risks of injury from alkaline cleaners.

WA3000   Washout keg / SS 9 Lt / MF-AB+S Type
WO18BL   Washout keg / SS 19 Lt / B-Lock
WO18PV   Washout keg / SS 19 Lt / Pin Valve
WO18CV   Washout keg / SS 19 Lt / Ball Lock

washout-board-flojetG56
BEER LINE WASHOUT PUMP

WA4000   FLOJET G56 WASHOUT PUMP BOARD

washout-manifold-alion-stainless-steel
KEG COUPLER WASHOUT MANIFOLDS

KE8090   Washout / Wallmount / MF-AB / 1x10mm Barb
KE8100   Washout / Wallmount / MF-AB / 2x10mm Barb
KE8040   Washout / Wallmount / D Type / 1x10mm Barb
KE8050   Washout / Wallmount / D Type / 2x10mm Barb
KE8020   Bypass cup / D-Type / Hand Held (CUB)
KE8030   Bypass cup / D-Type / Hand Held SS (CUB)
KE8060   Bypass cup / Plastic (Lion)
KE8070   Bypass cup / A-type / Hand Held SS (Lion)

WO5100 - Beer washout
WASHOUT MANIFOLDS AND TUBE

WO5100   Washout / Cross Trunk – 1/2″ SS (2 IN)
WO5200   Washout / Cross Trunk End – 1/2″ SS (1 IN)
WO5300   Washout Tube / SS 304G 1/2″ / 6 Metres
WO5400   Washout Tube / SS 304G 1/2″ / 3 Metres
WO5600   Washout / Crosshead Trunk Dual 3/4″ tube
SS 304G
WO5650   12.7mm nut and tail for 3/4″ washout IN
WO5700   3/4″ washout plug
WO5800   Washout Tube / SS 304G 3/4″ / 3 Metres

caleffi-water-pressure-reduction-valve
WATER PRESSURE REDUCTION VALVE

Protects beer system from operating outside of specifications.

WO5900   Water Pressure Reduction Valve
PRV / 3/4″ bspf / Caleffi
WO5950   Water Reg Gauge / Caleffi