Carbonator motors
CARBONATOR PUMP MOTORS
MOTOR / UNADA1/3Hp / suit Rotary Vane Pump
DRIVE: 1/3 HP (249w)
SPEED: 1425 RPM,
FRAME: 48Y
VOLTAGE: 1 Ph, 220-240 V
MOTOR MODEL: Unada KHFG4704
MOTOR SUITS (Clamp on configured):
Procon Vane Pump Series 1
Procon Vane Pump Series 2
Procon Vane Pump Series 3
Procon Vane Pump Series 7
Procon Vane Pump Series 8
KHFG4704 Motor/ UNADA1/3Hp / suit Rotary Vane Pump
MOTOR / MARATHON 1/4Hp / 30uf / suit Rotary Vane Pump
DRIVE: 1/4 HP (186w)
SPEED: 1425 RPM,
FRAME: 48Y
VOLTAGE: 1 Ph, 220-240 V , 30μF,
MOTOR MODEL: Marathon/Regal Beloit 5KCP36KNB313BT (A853)
MOTOR SUITS (Clamp on configured):
Procon Vane Pump Series 1
Procon Vane Pump Series 2
Procon Vane Pump Series 3
Procon Vane Pump Series 7
Procon Vane Pump Series 8
853 MARATHON MOTOR 0.19KW 0.25HP 30UM 240V 48Y A853
MARATHON MOTOR 0.37KW 0.5HP 240V 48Y A820
DRIVE: 1/2 HP (372w)
SPEED: 1425 RPM,
FRAME: 48Y
VOLTAGE: 1 Ph, 220-240 V
MOTOR MODEL: Marathon/Regal Beloit Motor Model No. 5KH36MNA445AX (A820)
MOTOR SUITS (CLAMP ON):
Procon Vane Pump Series 1
Procon Vane Pump Series 2
Procon Vane Pump Series 3
Procon Vane Pump Series 4
Procon Vane Pump Series 5
Procon Vane Pump Series 7
Procon Vane Pump Series 8
871 A820 1/2 HP, 1425 RPM, DP, 48Y,1 Ph 200-240 V, Carbonator Pump Marathon/Regal Beloit Motor Model No. 5KH36MNA445AX (A820)
Drop-in postmix ice wells
Drop-in Ice Wells
POSTMIX ICE CHILLED DROP INS
Connect to carbonator and postmix gun then fill with ice and you are ready to pour ice cold soft drinks.
DROPIN 10 COIL/25Kg Ice/DROPIN/ In counter
DROPIN2 10 COIL/25Kg Ice/DROPIN / Under counter
Procon carbonator pumps
PROCON ROTARY VANE PUMPS
PROCON STAINLESS ROTARY VANE PUMP
Procon stainless steel pumps with Silicone Carbide seals are the gold standard in rotary vane pumps for carbonator pumps.
133D100AF1BA Procon / Stainless / SiC / Carbonator pump
PROCON BRASS ROTARY VANE PUMP
Procon brass pumps are the gold standard in rotary vane pumps for water pressure pumps.
112D100F11CA Procon / Brass / Water pump
Carbonators
WATER CARBONATOR / SODA GENERATOR
High Volume McCanns Carbonator Large 220V / Dual outlet
- ASSE 1022- Provides pressure relief if the primary check valve fails ensuring that the secondary check valve will remain closed.
- McCann’s ASSE 1022 – Features working pressures from 10 to 200 psi, working temperatures up to 130 degrees, can be used in horizontal or vertical applications.
- Procon Rotary Vane Pumps – Designed to pump potable water for beverage applications. Strainers trap particles that can cause damage to the pump.
- Tank Capacity – 5.3 L)
- Two-Piece Probe Design
- Water Capacity
- 100 gph (378 lph) maximum
CR1000A Carbonator Large 220V / Dual outlet
CR1001A Carb part / ASSE 1022 BACKFLOW PREVENTER
CR1002A Carb part / VLV(*) PRV CARB TANK 180 PSI
CR1003A Carb part / PROBE 220V ELECTRICAL
CR1004A Carb part / ASSY PROBE FLOAT RING
CR1005A Carb part / MOTOR 230 VOLT 1/4 HP
CR1006A Carb part / STUD PROBE
CR1007A Carb part / Check Valve Single 1/4M Flare
McCann’s Carbonator – Installation Instructions
McCann’s Carbonator – Specifications
McCann’s Carbonator – Diagram
Countertop beer coolers
COUNTERTOP BEER COOLERS
Counter top beer chillers are ideal for quick or temporary installations where counter tops are unable to be modified.
Italian built for Australian conditions.
Smart countertop ice-bank beer cooler
This unit is great for cafes, restaurants and is also portable is perfect for smaller entertaining areas or offices.
Heavy-duty reinforced stainless steel construction
8 Kg Ice Bank
One tap or two tap units available
Made for Australian conditions
Dimensions 508x300x654mm WDH
A102657 Countertop Ice bank / Smart / 8Kg 1/6HP / 1 tap
A102658 Countertop Ice bank / Smart / 8Kg 1/6HP / 2 tap
Sting countertop ice-bank beer cooler
This unit is great for cafes, restaurants and is also portable is perfect for smaller entertaining areas or offices.
Ice bank size: 7kgs
Water tank size: 16L
Compressor size: 1/4HP
Includes: Tower, driptray, taps and handles
Dimensions: L645 x W438 x H850mm (incl. tower and handles)
Shipping weight: 34kgs
Made for Australian conditions
STING1 Countertop Ice bank / Sting / 1 tap
STING2 Countertop Ice bank / Sting / 2 tap
Beer pumps
Beer pumps
Flojet G56 Beer Pump
Designed for dispensing draft beer from keg through both long or short, vertical or horizontal line runs while maintaining the brewers recommended applied pressure on the beer. The gas pressure applied to the beer and the air/gas pressure applied to the pump, to move the beer from the vessel to the point of dispense, are completely separate, thus ensuring the repeatable quality of presentation and taste to the consumer.
FJG56 Beer Pump + 10mm barbs / Flojet G56
FJFRV Flow reversal valve / Flojet G56
Beer pumps can be powered by a Bracton Silient Air Compressor
Flojet accessories
Flojet accessories allow pumps to be configured to minimise connections.
FJFRV Flojet Flow Reversal Valve Suit G56
FJN1/4O Flojet T5000 liquid outlet barb 1/4 hose tail S/S
FJN3/8O Flojet T5000 liquid outlet barb 3/8 hose tail S/S
21000232B Flojet T5000 Outlet John Guest 3/8″OD 12PACK
21000229B Flojet G56 Outlet John Guest 3/8″OD 12PACK
FJPEL Flojet plastic elbow / Liquid. 2 pack
FJGEL Flojet gas shut-off brass elbow
FJGTE Flojet gas shut-off brass tee FJGI 30 Flojet gas shut-off brass barb
FJPTVE Flojet BIB transfer valve w/elbows
Gas Monitoring
Gas Monitoring
CO2 MONITORING
The CO2 Cellarwarn gas monitor is suitable to detect carbon dioxide in ambient air to safeguard workers in confined spaces.
Odourless and colourless, high carbon dioxide levels cause health problems from headache and fatigue to fatal asphyxiation. To ensure a safe cellar, all non-naturally ventilated areas must be monitored to prevent illness occurring, in accordance with AS 5034. The monitor provides a clear indication of ambient CO2 concentration and temperature using non-dispersive infrared technology to detect ambient CO2 concentration to 50,000 ppm.
Up to three remote units can be linked to the sensor unit, all of which comprise alarms and LCDs to alert workers, providing visible and audible alarms within the storage area and sentries at up to three entry points. Alarms occur when CO2 levels reach 1.5% and 3% (AS 5034 compliant) and automatically activate a relay which could be used to control a ventilation fan.
The low-maintenance monitor is suitable for breweries, cellars, cool rooms, beverage dispensing areas, hotels, fast-food outlets and other CO2 storage areas.
AS 5034-2005 LEGISLATION REQUIRES CO2 STORAGE FACILITIES IN THE BEVERAGE INDUSTRY TO BE MONITORED.
- Complies with AS 5034 gas standards
- Minimised Installation Cost
- Polycarbonate IP65 Enclosure
- User friendly operation
- Low maintenance costs
- Preset alarms set at 1.5% & 3.0%,
- Relay output at 1.5%
- Calibration certificate
- CO2 & temp display
- Audible + visual alarms.
GDCWCO2 Cellar Warn CO2 gas detector
GDCWREP Cellar Warn CO2 gas detector repeater
GDCWCO2/O2 Cellar Warn CO2/O2 gas detector
GDCWCAL/K Cellarwarn flow adaptor
GDCAGE Monitor protection cage
Postmix Towers
Postmix Towers
We are continuing to grow our range of post mix towers and bar guns on a monthly basis including custom made post mix towers which look like beer towers. Pepsi or Coca cola branded post mix towers are only available with approval from the brand. Most towers available branded or unbranded.
BRACTON BEER AND POSTMIX HYBRID TOWERS
Custom beer and postmix towers 1-8 Postmix valves + 1-12 Beer taps. Available in over 40 finishes and 10 designs.
CUSTOM MANUFACTURED
POSTMIX TOWERS – WUNDERBAR MUSTANG
The Universal beverage dispenser – Sleek, compact design with all the capabilities of large beverage dispensers in a small footprint. Advanced crew facing display incorporates optional second interface, enabling both crew serve and self serve.
COMPACT
Mustang provides innovative beverage dispensing in a small footprint. Only 20.3 cm (8”) wide,
31.1 cm (12.25”) deep.
CUSTOMIZABLE
Dispense up to 8 brands of your choice, including flavour shots that are configurable as brands.
ADDITIONAL FEATURES
Mustang is configured to be an isolated bar or countertop tower plumbed as a standard bar gun. It features a flow rate of 2 ounces per second, has recirculation capability and is ADA compliant.
UPGRADES AND SUPPORT
Upgrades for brand updates, flavour changes and software are easy using Mustang’s USB port.
COUNTER TOP
BAR MOUNT
OPTION: Consumer facing LED branding screen
POSTMIX TOWERS – ADRIA
ADRIA POSTMIX TOWER / 6 VALVES
POSTMIX TOWERS – POLAR
POLAR POSTMIX TOWER
POSTMIX TOWERS – TRISTAR
TRISTAR POST MIX TOWER / 4,6,8 VALVES
Technical news
Technical News
Flooding Diagram
Brave 90 – Update 10A to 15A plug
Celli has informed us of an upcoming change to all Brave 90 coolers to 15A power plugs. This will better accomodate electricity demand during compressor cycles and prevent plug degradation over time.
Font air bleeding tool
When installing Bracton fonts we recommend using our font tool. This handy little tool can be used to release end caps on most of our font range* to remove air locks to assist in evenly cooling the font lines. *For beverage fonts which do not use this tool require an allen key to undo the screw on the bleed port. For more information contact your local Bracton representative. PART: CCF0820
Bracton capital investment
Bracton has implemented a new capital investment strategy to drive greater efficiencies and growth into the next decade. Bracton has signed to acquire a new DMG Mori CNC lathe that will be delivered in September. We will be following this up in late 2019 with a highly customised and advanced Lincoln robotic welding cell. These technologies will provide improved production responsiveness and R&D prototyping capability combined with a new approach to repetitive production.
This investment will ensure Bracton’s stainless production line will be the most advanced in Australia delivering a high level of control and automation. Furthermore, this will ensure the majority of stainless components will continue to designed and made in Australia.
4 Coil chiller plates – Discontinued
To improve the way we manage stock we will be discontinuing stocking of 4 coil chiller plates and increasing holdings of the 6, 8 and 10 coil plates. We expect existing 4 coil stock holdings to last to June/July.
Font spigot size – Standardised
All Bracton fonts spigots (bosses) will be transitioning to 32mm over the next few months. The reason for this change is to bring 3/4” spigots in line with direct tap connections & cobra connections compatible with 32mm or multi clamp branding holders. If any doubt about ordering branding holders just mark the order, “holders to suit”.
6 March 2019
B-Lock quick connect seals
There are a number of B-Lock connection brands available in the market place and while all efforts are made to maximise compatibility between brands (current and past) there is will always be some variation between brands. In an effort to maintain the highest level of compatibility we use and recommend the BS015 o-ring which in our experience provides the best connections across all samples we have tested. In some cases a BS014 o-ring may provide improved connections and can be purchased separately.
6 March 2019
Agitator pump range review
Agitator spare parts range will be streamlined to MID7, STA-8, STD23 and Totton SPC54. Both RIO-7 and STP-18 agitator pumps will be discontinued as they are no longer being used in Bracton ice bank coolers.
RIO-7 to be replaced by MID-7 model
STP-18 to be replaced by STD-23 model