• +61 2 9938 9400
  • Hours 8 AM TO 4.30 PM
FluidFit - Straight Connector
Stock Code:
HUC 1/2-1/2G
Stock Code:
HUC 3/8-3/8G
Stock Code:
HUC 3/8-5/16G
Stock Code:
HGJ 3/8-5/16G
Stock Code:
HUC 5/16-5/16G
Stock Code:
HUCP 5/16-5/16G
Stock Code:
HUCP 5/16-1/2G
Stock Code:
HUCP 5/16-3/8G

FluidFit - Straight Connector

Add To Cart

Description

The CDC HUC 1/2-1/2G is a high-capacity, 1/2-inch to 1/2-inch push-fit equal union straight connector. Engineered to join two lengths of 1/2-inch OD polyethylene, nylon, or copper tubing securely. Its tool-free collet design enables rapid inline installation and replacement. Constructed from food-contact-approved acetal copolymer with stainless steel teeth for maximum durability. Ideal for high-flow commercial water filtration, marine plumbing, and industrial lines up to 150 PSI.

The CDC HUC 3/8-3/8G is a commercial-grade, 3/8-inch to 3/8-inch push-fit equal union straight connector. It is designed to splice or extend 3/8-inch OD tubing within coffee, beverage dispenser, and water filtration networks. Uses a rapid push-to-connect system that secures the tube instantly without compression fittings or sealants. Fabricated from certified food-safe grey acetal copolymer with high mechanical strength up to 150 PSI.

The CDC HUC 3/8-5/16G is a premium inline push-fit reducing union. Engineered to connect a 3/8-inch OD tube directly to a 5/16-inch OD tube without any flow constriction. Its dual-collet push-to-connect setup delivers rapid, secure joins with zero leak potential. Molded from high-tensile grey acetal copolymer, this connector is widely used in pneumatic controls, soda line transitions, and under-sink water filter installations up to 150 PSI.

The CDC HGJ 3/8-5/16G is a highly efficient push-fit reducing union stem. It inserts into a 3/8-inch push-fit socket to reduce the port size down to receive a 5/16-inch OD tube. Ideal for adapting manifolds, valves, and water purification filters to smaller lines without replacing entire fittings. Built with food-grade acetal copolymer body, stainless steel gripping ring, and nitrile O-rings. Maximizes system flow, and maintains leak-free seals up to 150 PSI.

The CDC HUC 5/16-5/16G is an equal straight connector designed to link two 5/16-inch OD tubing lines together. Featuring dual quick-connect ports with internal stainless steel collets and nitrile O-ring seals, this connector is ideal for pneumatic distribution systems, automotive vacuum lines, and beverage installations. Built from non-toxic acetal copolymer, guaranteeing material integrity and corrosion resistance up to 150 PSI.

The CDC Fluid-Fit HUCP Transitional Connector (5/16" Steel-Fit x 5/16" Tube) is an industrial push-to-connect fitting designed to transition rigid 5/16" stainless steel or metal tubing directly into flexible 5/16" OD beverage and pneumatic lines. Engineered with heavy-duty internal grip teeth and dynamic EPDM seals for vibration-resistant, leak-free fluid transfer.

Specifications:

  • Connection Side A: 5/16" Stainless Steel / Metal Tube Stem
  • Connection Side B: 5/16" OD Push-Fit Receiver
  • Material: Certified food-contact grey Acetal copolymer body with EPDM O-rings
  • Pressure Rating: Rated up to 150 PSI (10 Bar)
  • Installation Note: When connecting to chiller plates, ensure the metal stem is fully seated to the base of the fitting for an optimal seal.

The CDC Fluid-Fit HUCP Transitional Connector (5/16" Steel-Fit x 1/2" Tube) is an industrial push-to-connect fitting designed to transition rigid 5/16" stainless steel or metal tubing directly into flexible 1/2" OD beverage and pneumatic lines. Engineered with heavy-duty internal grip teeth and dynamic EPDM seals for vibration-resistant, leak-free fluid transfer.

Specifications:

  • Connection Side A: 5/16" Stainless Steel / Metal Tube Stem
  • Connection Side B: 1/2" OD Push-Fit Receiver
  • Material: Certified food-contact grey Acetal copolymer body with EPDM O-rings
  • Pressure Rating: Rated up to 150 PSI (10 Bar)
  • Installation Note: When connecting to chiller plates, ensure the metal stem is fully seated to the base of the fitting for an optimal seal.

The CDC Fluid-Fit HUCP Transitional Connector (5/16" Steel-Fit x 3/8" Tube) is an industrial push-to-connect fitting designed to transition rigid 5/16" stainless steel or metal tubing directly into flexible 3/8" OD beverage and pneumatic lines. Engineered with heavy-duty internal grip teeth and dynamic EPDM seals for vibration-resistant, leak-free fluid transfer.

Specifications:

  • Connection Side A: 5/16" Stainless Steel / Metal Tube Stem
  • Connection Side B: 3/8" OD Push-Fit Receiver
  • Material: Certified food-contact grey Acetal copolymer body with EPDM O-rings
  • Pressure Rating: Rated up to 150 PSI (10 Bar)
  • Installation Note: When connecting to chiller plates, ensure the metal stem is fully seated to the base of the fitting for an optimal seal.