Bracton now manufactures the lowest profile right angle keg adaptors in the industry. Adding only 14mm to height of a standard keg coupler, these adaptors allow you to fit kegs into tight undercounter and keg fridge installations with ease. Stainless Steel 304 grade construction.

MF-AB or A type keg couplers are designed to fit Coopers and Lion brewery beers ie. Tooheys, XXXX, Swan, Boags. INLET 5/8”, OUTLET 5/8”, Probe and Body Stainless Steel.

D type keg couplers are designed to fit Carlton and United Brewery kegs ie. VB, Carlton Draught. INLET 5/8”, OUTLET 5/8”, Probe and Body Stainless Steel.

S type keg couplers are designed to fit Asahi Brewery kegs.

The Bracton Beer Line Cleaning System is the industry standard in safety and efficiency in beer line cleaning. When connected to water supply, the dispenser operates without electricity, using water pressure as the power source.

As water flows through, it activates the dispenser drawing the correct mixture of DP1 and DP2 cleaning solution accurate to 0.1% into the beer lines and towards the beer taps.

The system increases efficiency by mixing the correct amount of cleaning solution and reducing labour requirements. This enhances safety precautions by eliminating a staff contact point with chemicals and pressurised vessels.

• Zero wastage, machine only mixes what venue needs.
• No direct contact with hazardous chemicals.
• No pressurised hazardous chemicals.
• Save on labour – no setup time.
• Meets Safe Work Australia’s hierarchy of control guidelines.

Suitable for small venues, Stainless Steel Washout Kegs can be used to manually mix beerline cleaning chemicals into beer systems. Complete with safety valve the washout keg is available with quick release pin or B-Lock fittings. Bracton recommends using non-hazardous beerline cleaner in pressure vessels to reduce risks of injury from alkaline cleaners.

Protects beer system from operating outside of specifications.

Primary gas boards are delivered with a primary break down regulator in addition to secondary regulators. Secondary gas boards require a primary break down regulation prior to connection to a gas cylinder.

Bracton regulators meet Australian standards when installed in accordance with AS5034.

In line CO2 heaters reduce the chance of gas regulators freezing due to gas volume exceeding the regulators capacity. Suitable for stadiums, breweries and other high demand applications.

Disposable cylinders ideal for soda water systems.

A Foam on Beer Detectors (FOBs) is used on long draught beer lines to minimise beer wastage. Beer FOBs are installed in the cool room on the tapping board and contain a float which drops when the keg is empty, keeping the beer line charged with beer (rather than foam).

Precision manufactured Bracton Beer FOB detectors have a flow rate in Australia at over 24 litres per minute making them ideal for medium to high volume applications i.e. Hotels, clubs and stadiums. Increased flow rate is essential to avoid float release in periods of high demand. With over 15,000 Bracton FOB detectors in the market, you cannot go wrong.

Bracton Foam on Beer Detectors (FOBs) are available with a wide range of inlets and outlets to suit all cellar board installation templates.

FOB INLET OPTIONS

• FDBARB6/I   FOB Inlet Barb / S/S 6mm
• FDBARB8/I   FOB Inlet Barb / S/S 8mm
• FDBARB10/I   FOB Inlet Barb / S/S 10mm
• FDBARB12/I   FOB Inlet Barb / S/S 12mm
• FDMBL/I   FOB B-Lock Inlet // Connects to 3/4″ B-Lock adaptor
• FDBARBG56   FOB Inlet Barb /G56 Beer pump //  Connects a beer pump direct to FOB inlet, tool-less install hygienic design
• FDBARBG56DUAL  FOB Dual G56 Pump Manifold w/JG FOB Adaptor //  Connects 2 x beer pumps direct to FOB inlet, for high volume applications  tool-less install hygienic design

FOB OUTLET OPTIONS

• FDBARB6/O   FOB Outlet Barb S/S 6mm
• FDBARB8/O   FOB Outlet Barb S/S 8mm
• FDBARB10/O   FOB Outlet Barb S/S 10mm
• FDBARB12/O   FOB Outlet Barb S/S 12mm
• FDMBL/O   FOB B-Lock Straight Outlet // Connects to 3/4″ B-Lock adaptor
• FDELBL  FOB B-Lock Elbow Outlet 5/8bsp swivel nut // Connects to 3/4″ B-Lock adaptor *Requires FDMO5/8.
• FDMO5/8   FOB Outlet 5/8BSPM // Connects direct to 5/8″ B-lock or Pin valve
• FDMMA   Manifold Adaptor/1/2″ Inline + nut & olive //  For connection to beer manifolds to supply multiple points with the same beer.
• FDM1/2MM   Nipple 1/2″/Suit micromatic ball valves.

Technical Bulletin- FOB Installation and operations

Bracton is the Australian distributor of Core Components Beer FOB detector range. The core range of FOB detectors have been precision manufactured to minimise hygiene issues and deliver perfect performance at and affordable price.

• Reduce beer waste – increase profit.
• Stainless steel FOB Detectors designed to eliminate hygiene problems of most other fob detectors.
• Self sealing spring-action venting mechanism external to the beer flow.
• Rotating vent for easy installation.
• Symmetrically shaped float means no unhygienic guide pins and screws.
• Fully tapered base prevents the build up of beer stone in the corners.
• Optimal sight glass seal which eliminates unhygienic gaps unlike typical face groove design.

Installing Bracton’s beer pump solution reduces beer gas consumption by 50 – 70% and increases the quality and life span of beer. The beer pump solution achieves this by reducing the volume of gas pressure required at the keg to enough to drive the beer from the keg to the beer pump (approximately 100kPa). Lower pressure at the keg also prevents over carbonation of the beer.

Bracton’s stainless steel FOB to beer pump manifolds minimise leak points, increase hygiene and help maintain a tidy cellar tapping board.

Technical Bulletin- FOB Installation and operations

Connect multiple taps to the one beer brand with ease. Bracton block manifolds deliver a scalable beer distribution solution from small hotels to stadium installations.

The latest in hybrid icebank beer chilling technology for bars and cafes. Utilising Bracton’s custom made Celli Icebank chassis, for the first time small venues can have frozen beer fonts and glycol temperature beers poured from ambient kegs at a fraction of the cost of a standard glycol cooler. This technology is exclusive to Bracton authorised distributors.

• Hybrid Icebank built for Australian conditions
• High energy efficiency – advanced insulation
• Longest product lines in industry
• For the coldest dispensed beer
• Chills to as low as -1.5C from a 25C keg
• Stainless case and floor pan
• Ideal for salty environments
• Rapid ice bank discharge hose (no need to siphon)
• New fluid forms ice bank at -2 to -4C
• Horizontal and vertical options
• New stylish front panel with cover inside to protect electrical parts

LITRE DISPENSED @ 16C / 24C / 32C / 43C
GEO20 – 53 / 32 / 23 / 16
GEO30 – 100 / 60 / 43 / 31
GEO50 – 147 / 88 / 63 / 45
GEO75 – 227 / 136 / 97 / 70
BRAVE90 – 260 / 156 / 111/ 80

The World’s smartest and smallest tube heat exchanger for drinks dispense. The Future of Dispense.

CoolTube is an amazingly efficient compact heat exchanger that provides superior heat exchange capabilities and also allows variable dispense temperatures at the point of dispense. CoolTube is compatible with any coolant medium, enabling installation and compatibility to all current dispense systems.

This patented technology is set to change the future of dispensed beverages.

CoolTube is constructed from stainless steel throughout and is over six times smaller and lighter than a standard remote cooling pod and has a superior delta T in comparison to competitive products. The product is so compact and lightweight that it doesn’t require fixings, therefore can fit in most confined spaces including directly under the font, saving valuable space behind the bar.

Dispensed drinks temperatures can be within 1ºC to 2ºC of the python recirculation temperature. There is very little variation in dispensed temperatures whether or not a half pint is poured or the tap is constantly opened. This is due to the low volume actually within the CoolTube and its unique tube heat exchanger technology.

CoolTube is easy to install and delivers outstanding results so as a time and space saving device it’s second to none. The product is compatible with all standard industry push in fittings and comes in two standard sizes (1 way and 4 way). The technology can also be adapted into the dispense font/tower.

All stainless steel components are made from high quality grade 316.

The Celli Ice Bank Coolers have extra long product coils to ensure beer is dispensed at the optimum temperature. Reliable European built condensers ensure years of quality performance without failure. Tested to Australian Standards AS/NZS 60335.1 & AS/NZS 60335.2.75

• Built for Australian conditions
• High energy efficiency – advanced insulation
• Longest product lines in industry
• For the coldest ice bank dispensed beer
• Stainless case and floor pan
• Ideal for salty environments
• Rapid ice bank discharge hose (no need to siphon)
• Casing with integrated pump and coils
• Horizontal and vertical options
• New stylish front panel with cover inside to protect electrical parts

For frozen or iced fonts, consider upgrading your ice bank to Bracton’s SubZero hybrid technology. Delivering the benefits of a glycol system with reserve cooling capacity.

Ideal for smaller applications, designed to plug-in and switch on, no refrigeration technician required.

Engineered. Reliable.

The Self Contained Sub Zero Glycol Beer Chiller is the latest in Bracton’s plug and pour range of glycol chillers. Engineered to provide years of trouble free reliable service, these systems are ideal for small commercial applications including country hotels, bowling clubs. Engineered to be affordable and reliable.

Energy efficient design
High thermal efficiency fibreglass tank minimised heat loss from tank in all Australian conditions.

Plug and pour
Designed to reduce installation costs. No need for refrigeration technician. No fuss installation. Plug in, fill up and turn on.

Features:

• Robust 80Lt or 180Lt tank
• Hermetic condenser
• High flow glycol connections
• P-Trap over flow
• Ideal for small venues
• Suitable for coolroom or ambient installation
• Australian made for all conditions including tropical environments

Ideal for small to large scale beer dispense and brewery glycol crash chilling. By separating the chiller from the condensing unit you can direct unwanted heat outside of the building and maintain a low noise environment.

Remote Glycol Beer Chiller reticulation systems

The most popular beer cooling systems in Australian hotels. This design is recognised as a consistent performer in all environments. Bracton’s chassis designed provides supreme flexibility and customisation, making the ideal choice where performance and reliability matter. Suitable for installation in cool room or ambient.

Product manual

High flow rate design

Bracton designed performance manifolds ensure high glycol throughput, increasing the efficiency of the whole draught pump system. Aiding in icing of beer fonts, through the summer months. Available in a full range of configurations.

Supply manifolds are fitted standard with ball-valves, insulation and wall mount brackets. 1/2″ barbs fitted to ball valves and 1″ hose barbs fitted for connection to Glycol Beer Chiller.